Pages

Friday, December 16, 2016

DIY Holiday Gift Boxes


What's the first gift they'll want to unwrap? The one in a box that looks extra special! Here's how you can take generic gift boxes from the dollar store and transform them into something magical.


Materials you need:

• Plain cardboard boxes of various kinds and sizes
• Figure or object for the box top (a little house, an animal-let your imagination be your guide)
• White acrylic paint
• Acrylic paint in a color of your choice for the body of the box
• Paint brushes
• Quick-drying craft glue
• Glue gun and glue sticks
• Glitter (optional)
• Epson salts (for the snow)
• Ribbon


For this first set of boxes, I used plain brown cardboard boxes of various shapes and sizes.


Step 1: Paint the body and the side of your box lid with acrylic paint in a color of your choice. I pulled the color red from the little houses I planned to use on the box tops.


Step 2: Paint the top of the lid with white acrylic paint. 


Step 3: Next attach the object, figure or animal onto the top of the box lid. (The little snowman was found at Walmart by the way.)


Depending on the object you choose, you may or may not require a glue gun to attach it securely. White glue alone wasn't going to hold this snowman, so I resorted to hot glue. 


Step 4: You could leave the box top with just the white paint and that would look fine, but I wanted my lid to have the sparkle of snow. 

Warning: This is where this project gets a little messy! I recommend you lay down some newsprint for easy clean up. 

Once your object or figure is dry on the box lid, spread a generous layer of quick-drying craft glue on the remainder of the lid (I used a popsicle stick to spread the glue). Sprinkle epsom salts over the surface of the glue. Add a few glitter sparkles as well, if you like. Press down the epsom salt and sparkles into the glue with your fingers. Allow the lid to dry.

Once the salt and glitter is set, turn the lid on its side and gently knock off any of the surplus salt and glitter that did not adhere.


Step 5: Attach a ribbon to your box. I used a bead of white glue under the ribbon to keep it in place. 


This box had a deep lid, so I used a plaid ribbon and ran the ribbon around the centre of the box. (You can find similar vintage Christmas houses at Michaels craft store.)


On the two round boxes, I used a narrow gingham ribbon and wrapped it around the circumference of the lid.


To create this box topped with a church, I painted a plain cardboard box sage-green. Next I stenciled some snowflakes in a slightly lighter shade of sage. 

To finish off the box, I ran white ribbon all the way around the lid (a fine bead of white glue under the ribbon secured it in place). Then I topped the white ribbon with a narrow band of gold ribbon (again a fine bead of glue holds the ribbon in place). At the front, I attached a bow in the same gold ribbon (I used hot glue to attach the bow).


This next group of boxes were even faster to create. These dollar store boxes already came with a nice silver print. 


To top this box, I used a reindeer and some mini-Christmas trees (which mirrors the theme of the silver print on the box). All I did was paint the lid white. Then I attached the reindeer with some hot glue. 

The next step was to add the epsom salt and glitter (see method above for attaching the salt and glitter).


To secure the trees, I twisted off each tree from its cork base. Then I used the wire at the bottom of the tree to poke a small hole in the top of the box lid. 

Next I applied a little hot glue to the base of the tree and inserted the wire trunk back into the hole. On the underside of the lid, I reattached the cork with a little hot glue.


Isn't this bear sweet? I think this box would make a great gift for a toddler or a baby's first Christmas.

Again my box had a nice silver snowflake pattern, so all I did was fancy-up the lid (see working method above). Around the lid, I ran a pretty, baby-blue ribbon with a bow at the front (again see notes above about securing the ribbon and bow).


I hope you've found some inspiration to make your own gift boxes extra special this holiday season!

Tuesday, December 6, 2016

Diamonds & Pearls


This little craft idea couldn't be any easier! In fact these ornaments are so simple to make, you could easily do this project with the kids or grandkids. (When working with kids just make sure to choose large stickers that are easy for little hands to work with.)

The list of materials you need is pretty short in all my examples.


Materials you need for these DIY snowflake ornaments:

• a box of ornaments with a pearl finish 
• snowflake stickers with a diamond-like finish on a transparent backdrop (I found my snowflakes at Michaels)
• a sheet of individual blue diamonds (not shown- also available at Michaels)
• pair of scissors
• ribbon or a metal hook to hang the finished ornament

Step 1: Detach a snowflake sticker from the transparent backing paper. Place the sticker on the face of the ornament, but don't press it down just yet! When a sticker is roughly tacked into position, it is still easy to lift and move. As you build your design on your ball, you may need to lift and adjust the spacing of your stickers. 



Step 2: The fun in this project is creating your own snowflake pattern on the surface of your ornament. Once you are happy with the layout of your pattern, press the snowflakes down with your thumb to secure them in place.


Let your imagination be your guide in creating your pattern. 

To create my ornament, I placed a row of snowflakes around the middle of the ball. On the bottom centre of the ball, I put a full snowflake. At the top of the ornament, I used fan-shaped sections, which I created by cutting up full snowflakes with my scissors.  In between the snowflakes, I filled the empty space with individual blue diamonds. 


For this next group of ornaments, I used small individual diamonds and diamonds in a wave-like swirl.

Materials you need for these diamond swirl ornaments:

• a box of clear ornaments 
• stickers with diamond swirls on a transparent backdrop (I found these at Michaels)
• a sheet of individual diamonds (to fill in any gaps- also available at Michaels)
• pair of scissors
• ribbon or a metal hook to hang the finished ornament



There are an amazing array of stickers on a clear backing available. You can find stripes and swirls as well as individual diamonds and pearls to personalize any plain ornament. 



Materials you need for this ornament with bands of pearls:

• a box of ornaments with a pearl finish 
• stickers with bands of pearls (I found these at the Dollar store)
• a sheet of individual pearls (to fill in any gaps -again from the Dollar store)
• pair of scissors
• ribbon or a metal hook to hang the finished ornament

For this ornament, I used a band of different sized pearls. Around the middle of the ornament I ran one long stripe of pearls ( two bands pieced together). Then I cut the band into smaller sections and used it to add v-shaped lines of pearls that run from the top and bottom of the ornament to the middle. If you have any gaps, fill them in with individual pearls like the ones you see on the righthand sheet.


Letters are a great way to tailor an ornament to a gift recipient. For the next ornament, I used a sheet of pearl letters. 

Materials you need to make the ornaments with a recipient's name:

• a box of ornaments with a pearl finish 
• letter stickers with a pearl-finish
• pair of scissors
• ribbon or a metal hook to hang the finished ornament


To frame the name, I used pearl swirls (see an example of one of the sheet of swirls later in this post).


If you don't care for the pearl letters, there are glittery options as well.


Place your finished ornament on a colorful napkin along with a sprig of fresh greenery and you have a keepsake guests can take home after a holiday meal.


Materials you need for these ornaments with a pearl swirl:

• a box of pearl ornaments 
• stickers with swirls that have a pearl finish (I found these at the Dollar store)
• a sheet of individual pearls (to fill in any gaps)
• pair of scissors
• ribbon or a metal hook to hang the finished ornament

I found that the complicated swirls could be become a bit of a nightmare to deal with once you pulled them off the backing paper, so I cut the swirls into smaller sections with my scissors and pieced the sections back together on my ornament.


Super easy and really pretty, these ornaments are a snap to make!


Bookmark this post with a Pin.

Wednesday, November 23, 2016

Grape Harvest Wreath


I really admire the creative people who come up with original craft projects in magazines and books. It's a fun type of work, but it is not without its frustrations. Take this Grape Harvest Wreath. It got off to a couple of bad starts.

This odyssey first began when I came across bunches of yellow grapes at the Dollar Store. They were cheap plastic grapes, but in the sunlight, they had a lovely glow about them. So I bought all the bunches the store happened to have.

Then I went home and tried to hot glue them to a wreath form. What a disaster! Each bunch of grapes had so many moving parts (grapes)! By the time I had them glued down, there were wads of glue and yet they still weren't entirely secured to the wreath. Discouraged, I set the whole project aside until I could come up with a better idea.

Fresh inspiration struck. I decided to tie the bunches of grapes to the wreath with fishing line. This worked perfectly, but it wasn't going to be easy for someone else to replicate. Then I had another creative flash: pin the grapes down first and then secure them permanently with the fishing line! So much easier! This worked like a charm. 


In the end, I am really pleased with the way this wreath turned out. I hope my pictures do it justice because, in real life, the wreath is really pretty.

Here's how you can make this wreath for yourself:



Materials you need to make a Grape Harvest Wreath:

• Assorted faux grapes (see notes below)

• Styrofoam wreath (size of your choosing)

• Fireline fishing line (10 lb weight)

• 18 gauge wire (to make pins to hold your grapes on the wreath form)

• Ribbon to hang the finished wreath

Tools you need:

• Wire cutters

• Scissors



A note about the grapes: 

I used two different sized bunches of grapes. I found that the smaller bunches came in handy on the outside and insides edges of my wreath. I also cut a few of the larger bunches into a couple of smaller pieces.

I used a mix of different colored grapes, but you could easily reduce the palette to a couple of colors or even a single color. The grapes I used were yellow, off-white (seen above), medium red and dark red (seen above).

As to the number of grapes you'll need that may vary according to the size of the wreath you select. For my project, I was very generous with the grapes. For a 12" wreath I used:

8 large bunches of yellow grapes
6 large bunches of off-white grapes
3 large bunches of medium red grapes
2 large bunches of dark red grapes
4 mini bunches off-white grapes
4 mini medium red grapes
4 mini dark red grapes



The wreath (10 inches) I have pictured in this how-to demonstration would use fewer grapes.



How to make the wreath:

Step 1: Using your wire cutters, cut 2" segments of 18 gauge wire. Bend the wire segments into U-shaped pins. 

Step 2: Using the pins you've made, start pinning the grapes onto the styrofoam wreath. Try to catch the main branch holding the grapes together with each of the pins to make your bunches are well fastened to the wreath. I'd recommend using at least 4 pins for a large bunch of grapes.


Step 3: I worked with the large bunches first and tried to drape them attractively over the hump of the wreath. 

Step 4: Go back and fill in any gaps with smaller bunches of grapes. 



Step 5: As I indicated earlier, a single bunch of grapes has many small moving parts/grapes. Once you have all the grapes pinned to the wreath, you want to secure them so there is no way they can move and pull the pins loose.

Work a length of the Fireline fishing line in among the grapes on the face of the wreath and then gently turn the wreath over. Make a knot on the back of the wreath and pull it tight. Don't cut the ends!

Step 6: Circle round and round the full circumference of the wreath feeding the fishing line in among the grapes, so it disappears. The goal is to tie down all the grapes, so they are really secure and won't move. When you have finished wrapping the entire wreath, cut the fishing line and tie a knot to close the line.


Step 7: Make a loop of ribbon and a bow to hang your wreath. Your done!


 Hang and enjoy your Grape Harvest Wreath!

Friday, July 29, 2016

How to Make a Dried Flower Wreath


Now is the time to think about preserving some of summer's bounty and carrying it into the fall with a dried flower arrangement or wreath. 


Things you'll need:

• Dried flowers and a large bunch of dried Sea Lavender or Limonium latifolia

• Wire wreath frame (I got mine and Michael's. I was afraid that the dark green of the wire frame might show through, so I quickly spray painted it white.)

• Raffia, Spanish moss or some other material of your choice to fill the wire frame.

• Light gage florist's wire

• Scissors


Find simple techniques for drying flowers in this blog post.


Begin by stuffing the inside of your wire wreath form. The goal here is to fill the wire frame with some sort of material that will catch and trap the dried flower stems that you will insert into it. 

You can use an array of materials including Spanish Moss (grey in color) or fine wood shavings (often used to line Easter baskets). I used Raffia for my wreath. Unlike the Spanish Moss, there are no issues with allergies, and it comes in a convenient coil that I simply unwound and placed into the reverse side of my wreath form.

Twist florist's wire into a knot on the outside edge of your wire frame. Wrap it around and around the frame to hold the raffia in place. Once you have gone the whole way around the circular form, twist the end of your florist's wire onto the inside of the frame to secure it.


Next you need to create a pretty backdrop for your dried flowers. 

I would have preferred to use German Statice, which is very sturdy and easy to work with. In this instance, I was only able to find Sea Lavender or Limonium latifolia, which is much finer and more delicate. Its feathery branches can snap unexpectedly, if you are not careful. 

(A note about availability: Statice of varying kinds is commonly available most places you buy cut flowers. I have even seen it at my local grocery store in the floral department at this time of year. A local farmer's market is also a good place to look for it.)

You may find your dried Sea Lavender branches will shed some of the tiny blue flowers, so choose a smooth surface on which to work that will make sweeping up any flowers that drop fast and easy. 


Break off short stems from your bundle of dried Sea Lavender that are approximately five or six inches in length. 

Gather a few of the short lengths into a bunch and insert the them into the wreath allowing them to catch in the tangle of raffia.


Continue inserting small bunches of Sea Lavender, working your way around the wreath. 

(Tip: I found that it was best to work in a single direction, placing one bunch in the centre, then one on the inside edge and finally one of the outside edge of the wreath.)


Here is the completed backdrop of Sea Lavender.


Next, gather together your dried flowers. Shorten the stem length to about a five or six inches by snapping the flowers off.


Work with the largest type of dried flower first. In my case it was the Statice, Limonium Sinuatum


Insert the flowers into the wreath, again moving in a single direction around the circular wreath. Like the Sea Lavender, the flowers should catch in the raffia.


I placed all the white colored Statice (Limonium Sinuatum) first 
and then moved on to purple flowers. 


Next, I added in this pretty magenta Gomphrena.



The wreath with Statice, Limonium Sinuatum and the Gomphrena in place.


Now for the final touch, I added in the Strawflowers.



Here is the finished project.



When I was finished, I still had a small bunch of dried Gomphrena flowers left over. So I decided to make another wreath.

I snapped the flowers off leaving a half inch of stem on each. Then I hot glued the flowers onto a small grapevine wreath.



Here is the completed wreath.